Welding Repair and Fabrication in Granbury, TX
We fix metal that broke and build metal that was never there. Gates, railings, frames and custom pieces, and we can often weld on site instead of hauling your metal away.
/filters:strip_exif()/filters:no_upscale()/media/74e0ff7c-7c73-4495-a28b-76d09bd6917f.jpeg)
Red-iron frame, built on siteWhat kinds of welding repair and fabrication does Leal's take on?
Leal's Welding & Construction takes on welding repair and metal fabrication in Granbury, TX and the towns around it. Repair means fixing metal that already exists: a gate that no longer swings true, a frame that cracked, a fence rail that let go. Fabrication means building something new from raw metal, like a stair handrail, a porch railing, a frame or a custom cover. The same crew that welds our metal buildings and fences does this work, and we can often weld on site, so a long gate or a railing set in your ground does not have to be hauled anywhere. Not every job suits welding in the field, and we will say so when we look at it. Tell us what is broken or what you want built, send a photo if you can, and we will tell you straight whether it is a fit.
Two ways metal comes to us
Some customers bring us something that broke. Others bring us an idea and a spot on the property. Both start the same way: we look at it and talk it through.
Fix what broke
This is the kind of metal that breaks on a working property. It gets pulled on, driven into, loaded up and left out in the weather, and sooner or later a weld lets go. If the metal is still sound, we can often weld it back and put it to work.
- Broken or sagging gates
- Cracked or bent frames
- Fence rails and posts
- Trailer-type and ranch metalwork
Ask us if yours is a fit.
Build what is missing
Fabrication starts with raw metal and a measurement. We cut, shape and weld the piece to fit your steps, your porch or your frame, instead of bending a store-bought part to almost work.
- Stair handrails
- Porch railings
- Metal frames
- Covers and custom pieces
Bring us a sketch, a photo or just the spot.
Rails down a hillside
A hillside does not give you a flat run to work with. Steps climb in stone, the slope falls away on one side, and a house sits at the bottom. A store-bought rail section will not follow that. A handrail built for the spot has to rise and turn with the steps.
These are metal stair handrails we welded along steps running down a hillside to the houses below. Each one is cut and fitted to its own slope and tied in along the way, the kind of piece that only comes out right when it is built for that ground.
- Rails that step with the stairs instead of cutting across them
- Built from raw metal, measured to the run you actually have
- Porch and stair railings both, from one crew
/filters:strip_exif()/filters:no_upscale()/media/99c5a0c0-d379-4371-ab67-e766a1b50bb8.jpg)
/filters:strip_exif()/filters:no_upscale()/media/9dae28e8-9c2c-423d-b72f-9e774603ab24.jpg)
/filters:strip_exif()/filters:no_upscale()/media/23f47c02-0818-45d5-bedd-41fd336f80fa.jpg)
Small jobs, same metal
A few more pieces from Leal's own jobs: a porch railing, a welder at work on a frame, and the hillside rails from another angle.
/filters:strip_exif()/filters:no_upscale()/media/c92dcddb-463f-425e-b6c6-2a157a3fbdab.png)
Welded porch railing
Metal railing welded around a front porch.
/filters:strip_exif()/filters:no_upscale()/media/1e43ac0f-01c4-4688-97d5-0737ba6645a1.jpeg)
Welding on location
A worker welding at the base of a red-iron frame on a rural lot.
Stair handrails on a slope
Metal stair handrails running down a grassy hillside to a two-story house.
Welding repair questions
Can you weld on site?
Often, yes. Leal's Welding & Construction welds on location around Granbury, TX, which is how we build metal frames and fences, and it saves hauling big gates and railings. Some jobs are better worked away from the property, and we will tell you which kind yours is once we see it or a photo of it.
What can you repair?
Ask us, and we will look at it. We commonly see broken gates, cracked or bent frames, fence rails and ranch or trailer-type metalwork around Granbury. Whether a piece is worth welding back depends on the metal and how it failed, so send a photo and tell us what happened. We will say plainly if it is not a fit.
Can you build custom railings or handrails?
Yes. We fabricate metal stair handrails and porch railings in Granbury and nearby, cut and welded to fit your steps, slope or porch edge. Our hillside handrail photos on this page show rails built to follow the ground. Send us the location, a photo and what you have in mind, and we will talk through how to build it.
What affects the price of welding repair or fabrication?
Price depends on how much metal the job takes, how much cutting and fitting it needs, how hard the damage is to reach, and whether we can weld on site or the piece has to move. A small rail fix costs less than a custom handrail down a hill. For work in Granbury, we look at it first, then give you a quote.
What areas do you serve for welding?
We are based in Granbury, TX, and take welding repair and fabrication jobs in Granbury, Weatherford, Stephenville, Cleburne, Glen Rose, Joshua and Fort Worth, plus the country between them. If your property is near one of those towns, send us the location and what needs welding, and we will tell you if we can take it on.
Tell us what needs welding
A broken gate, a cracked frame, a railing you cannot find in a store. Send us the location and a photo, and Santos and the crew will talk it through with you.
/filters:strip_exif()/filters:no_upscale()/media/74e0ff7c-7c73-4495-a28b-76d09bd6917f.jpeg)